
AMMREC (AMMONIA RECOVERY) Technology
AMMREC (AMMONIA RECOVERY) Technology
Abstract
Along with Hydrogen Sulfide (H2S), acid gas streams from Sour Water Stripper (SWS) contain significant amount of Ammonia (NH3). Conventionally NH3 is destructed in Sulfur Recovery Unit (SRU) / Sulfuric Acid Plant (SAP) at high temperature (>2200 °F), increasing air / Oxygen (O2) demand, energy consumption and capital cost of SRUs / SAPs. Ammonia also increases risk of corrosion in acid gas pipelines and SRUs / SAPs due to Ammonium Bisulfide (NH4HS) precipitation.
Fluor has developed a patent pending process called AMMREC (AMMONIA RECOVERY), which recovers NH3 as a product and improves overall capital and energy efficiency of the SRUs / SAPs. In this process NH3 in the acid gas is absorbed with diluted Phosphoric Acid (H3PO4) or Mono-Ammonium Phosphate (MAP) and converted to Di-Ammonium Phosphate (DAP). In the solvent regeneration column, DAP is converted back to MAP and NH3. This allows for significant reduction of NH3 in the acid gas stream going to SRU / SAP while recovering ammonia as a valuable product in the form of aqueous / anhydrous ammonia or DAP. The process not only recovers >90% NH3 present in the acid gas stream but also results in significant increase in capacity and reduction in operating cost of existing SRUs / SAPs or reduction in capital and operating cost of new SRUs / SAPs. This process can be cost effectively integrated with the existing as well as new SWSs and SRUs / SAPs. This highly energy integrated process also allows recovery of process waste heat to generate low pressure steam or hot water for power generation via Organic Rankine Cycle (ORC) or for chilled water generation via Vapor Absorption Chiller (VAC).
Client Benefits
The benefits of AMMREC process include:
Recovery of ammonia from the acid gas streams as anhydrous / aqueous NH3 product or DAP. Selling DAP as a product avoids solvent regeneration.
Recovered ammonia qualifies as low carbon / green product as its production doesn’t use any carbonaceous fossil-based feedstocks.
Cost of recovered NH3 is significantly lower compared to conventional ammonia production processes.
Creates opportunities to produce green urea by combining recovered NH3 with recovered CO2.
Increases capacity and lowers operating costs of the existing SRUs / SAPs or lowers capital and operating cost of new SRUs / SAPs.
Increases H2S concentration of lean acid gas streams resulting in improved energy efficiency of SRUs / SAPs.
Reduces NOx emissions from the SRUs / SAPs.
High energy integration allows recovery of low-level waste heat by generating LP steam or hot water for power generation via ORC or for chilled water generation via VAC, thus minimizing overall energy consumption in the process.
This process can be cost effectively integrated with the existing as well as new SWSs and SRUs / SAPs.
The process can be configured to treat and recycle blowdown water to minimize fresh water make-up.
&w=3840&q=75)

&w=3840&q=75)