Projects
Home  Projects  Projects
 
GASCO NGL Extraction Plants - EPCM 
Client: GASCO
Location: Abu Dhabi, United Arab Emirates
Summary
|
Challenge
|
Solution
|
Conclusion
 
Aerial View of Natural Gas Liquid Extraction Plant Construction
Executive Summary
Fluor performed engineering, procurement, and construction management (EPCM) for Abu Dhabi Gas Industries Limited’s (GASCO's) natural gas liquid (NGL) extraction plants at Bab and Asab in Abu Dhabi.
Construction Site for Natural Gas Liquid Extraction Plant
Client's Challenge
ADNOC and three other companies formed GASCO in 1977 as owner and operator of the new NGL facilities.
 
The NGL plants were required to be self-sufficient in utilities. This requirement necessitated the development of water wells and installation of water treating facilities. In addition, gas turbine powered generator sets were installed at each site to supply the necessary electrical power. Auxiliary facilities were also built at each location including sewage treatment, flare stacks and burn pits, potable and fire water storage, diesel and gasoline storage, telecommunications system, fire and safety surveillance system, control building, electrical substations, fire station, inert gas generator, instrument air system, and a mosque.
Natural Gas Liquid Extraction Plant Engineering, Procurement, and Construction Management
Fluor's Solution

Fluor performed EPCM for GASCO's natural gas liquid (NGL) extraction plants at Bab and Asab in Abu Dhabi, which were rated at 130 MMSCFD and 350 MMSCFD. The two plants were designed to recover a natural gas product from oil-associated gases that were being flared. The basic process consists of increasing gas pressure by motor and gas turbine driver compressors and lowering temperature using propane refrigeration and turbo-expansion. The resulting liquid product NGL is pumped via pipeline to Ruwais for fractionation into butane and propane products. The installation of water wells, water treating facilities, power generators and other auxiliary facilities was required at each location.

The client selected Fluor's Improved EconamineSM Process to achieve the desired results. Cost for direct field labor in the desert required prefabrication to the maximum extent. Therefore, major portions of the NGL plants were modularized and constructed in fabrication shops in the United Arab Emirates.

These plants are a portion of the Abu Dhabi gas project, which consisted of:
- NGL extraction plants at Bab, Asab, and Bu Hasa
- Fractionation and storage facilities at Ruwais
- NGL pipelines from the three NGL plants to fractionation at Ruwais
- NGL product loading facility at Ruwais

Natural Gas Liquid Extraction Plant Engineering, Procurement, and Construction Management
Conclusion

In addition to providing EPCM services to GASCO, Fluor used its proprietary Improved Econamine process to remove H2S from the feed gas. Fluor also had 80 modules fabricated in Abu Dhabi and shipped to the new facility via service boats and a specially designed, multi-tiered highway vehicle.

Each plant was designed to be self-sufficient in utilities; therefore, Fluor designed and built fire and potable water systems and installed gas turbine generator sets to meet power needs. Each plant also included a telecommunications system, fire and safety surveillance system, and a mosque.

View Similar Projects:
;#Middle East;#
Related Business Segment & Services
Gas Processing, Gas Treating, & LNG